Question 1

Are eavestroughs and gutters the same thing?

Accepted Answer

Yes. In Ontario, “eavestrough” is the common term for the gutter channel installed along the roof edge. Both names refer to the system that collects roof runoff and carries it to the downspouts.

Question 2

What are seamless aluminum eavestroughs?

Accepted Answer

Seamless aluminum eavestrough is formed in long continuous runs for the home, which minimizes unnecessary joints along straight sections. Corners, outlets and transitions are still intentionally joined where the roofline changes direction or water exits the trough.

Question 3

What causes eavestroughs to overflow?

Accepted Answer

Common causes include debris, blocked outlets or downspouts, poor pitch, undersized drainage for the roof area, too few outlets, or water overshooting the trough at a concentrated roof valley. The cause should be identified before simply adding another piece of gutter.

Question 4

Do you install seamless aluminum eavestrough?

Accepted Answer

Seamless aluminum eavestrough is commonly formed in long runs sized and configured for the home. That approach reduces unnecessary joints while keeping corners, outlets and transitions intentional and serviceable.

Question 5

Should I choose 5-inch or 6-inch eavestrough?

Accepted Answer

The right size depends on roof area, roof pitch, valley concentration, outlet spacing and how the drainage is laid out. A larger trough can provide more capacity, but sizing the downspouts and outlet locations correctly matters just as much.

Question 6

Why does downspout placement matter?

Accepted Answer

The downspout is the exit path for all the water collected by the trough. Poorly located or restricted outlets can make a good eavestrough overflow. The discharge also needs to be directed to a safe location rather than concentrated beside the foundation.

Question 7

How are downspout locations planned?

Accepted Answer

Downspout locations are planned around roof area, trough pitch, outlet spacing, architectural elevations and where water can be discharged at grade. The goal is to create a clear path from collection at the eaves to release below.

Question 8

How far should the downspout discharge from the house?

Accepted Answer

The goal is to move water away from the foundation to a location where it can drain safely. The exact setup depends on grading, walkways, window wells, neighbouring property and municipal requirements, so the discharge path should be planned for the specific home.

Question 9

What does soffit do?

Accepted Answer

Soffit closes and finishes the underside of the roof overhang. Vented soffit can also provide intake ventilation for the attic when it is paired with a properly designed exhaust path such as ridge ventilation.

Question 10

Can new soffit improve attic ventilation?

Accepted Answer

It can when the existing soffit intake is missing, blocked or insufficient and the attic has a compatible exhaust system. Replacing soffit alone does not automatically fix ventilation; the intake and exhaust path need to work together.

Question 11

Why is my soffit stained or sagging?

Accepted Answer

Staining or distortion can come from roof-edge leaks, condensation, animal activity, blocked ventilation, deteriorated material or water backing up at the eaves. The source should be found before covering the symptom with new panels.

Question 12

What is fascia and why does it matter?

Accepted Answer

Fascia is the finished vertical roof-edge surface behind the eavestrough. It provides a clean roofline and, depending on the construction, is part of the mounting area for the gutter system. Rotten or damaged wood behind the aluminum should be corrected before new trough is installed.

Question 13

What is the difference between fascia board and fascia cladding?

Accepted Answer

The fascia board is the structural or wood edge at the roofline, while fascia cladding is the finished exterior material that wraps and protects that face. On many homes, aluminum fascia creates the visible finished surface behind the eavestrough.

Question 14

What should I watch for during Ontario winter?

Accepted Answer

Repeated overflow, icicles concentrated at the same location, sagging troughs, separated joints and frozen discharge points are signs the drainage path should be checked. Ice can be a symptom of more than one issue, so the cause should be diagnosed rather than assumed.

Question 15

Do gutter guards eliminate maintenance?

Accepted Answer

No system makes a roof edge completely maintenance-free. Guards can reduce the amount of debris entering the trough, but the roof, valleys, guard surface, outlets and downspouts still need periodic inspection.

Question 16

Do you service the GTA and surrounding Ontario communities?

Accepted Answer

Yes. This page is written for Locked Roofing & Exteriors’ Ontario service area, focused on the Greater Toronto Area and surrounding communities. Final scheduling depends on the project location and scope.

BUILT TO DRAIN.DESIGNED TO LAST.

FOUR PARTS. ONE SYSTEM.

Eavestrough

Fascia

Soffit

Downspout

ROOFLINE
SERVICES.

Repairs

Efficient System Builds

Roof Replacement Coordination

WHAT CHANGES
FROM HOME TO HOME.

Capacity

Outlet Placement

Ventilation

Finish Matching

QUICK
ANSWERS.

SHOW US THE HOME.
WE'LL MAP THE ROOFLINE.