CELLULOSE & FIBREGLASS BLOW-IN INSULATION

01 / BLOW-IN INSULATION

LOCK IN THETEMPERATUREYOU PAID FOR.

offers blown-in cellulose and fibreglass insulation for attic top-ups, new coverage and full re-insulation after removal. We choose the material based on the attic, what is already there, available depth, ventilation and the performance the home actually needs.

ATTIC TOP-UPSCELLULOSEFIBREGLASSFULL RE-INSULATION

INQUIRE ABOUT INSULATION SERVICES

WHAT IS R-VALUE?

R-value tells you how strongly insulation resists heat flow.The higher the R-value, the harder it is for heat to move through that insulation. In an attic, the total R-value comes from the installed material, its depth and how consistently it covers the space.

CELLULOSE VS. FIBREGLASSTWO GOOD MATERIALS. DIFFERENT STRENGTHS.

CELLULOSE

R-3.0–3.8 PER INCH*

Often better for: irregular, obstructed or tighter attic areas because the smaller loose-fill fibres can settle closely around framing, wiring and penetrations.

PROSGreat PerformanceFills Every GapEco-FriendlyFire TreatedSound Dampening

FIBREGLASS

R-2.7–3.6 PER INCH*

Often better for: open attic top-ups and broad horizontal areas where a lightweight blown system can be installed evenly and efficiently.

PROSWidely AvailableBudget FriendlyEasy to InstallNon-Combustible

WHICH ONE DO WE USE?

We look at the existing insulation, moisture history, attic shape, available depth and the target performance. The goal is not to force one material everywhere — it is to choose the better fit for that attic.

*Natural Resources Canada publishes design R-value ranges for both materials. Actual installed performance depends on the exact product, installed density and final coverage depth.

INSULATION REMOVALMOLD REMOVAL

02 / INSULATION REMOVAL

REMOVE THE OLD.EXPOSE WHAT'SUNDER IT.

offers full insulation removal and re-do services when the existing material is wet, contaminated, mould-affected, pest-damaged, badly uneven or no longer worth keeping. We vacuum it out, expose the attic floor, correct accessible problem areas, then rebuild the insulation system properly.

FULL REMOVALATTIC RESETATTIC PREPRE-INSULATE

INQUIRE ABOUT INSULATION SERVICES

INSULATION REMOVAL / ATTIC RESET

OUR REMOVAL + ATTIC RESET SERVICES02

FULL INSULATION REMOVAL

We vacuum out loose-fill insulation when the existing material is wet, contaminated, pest-damaged, mould-affected or simply no longer worth keeping.

ATTIC RESET + INSPECTION

With the attic floor exposed, we can see hidden staining, air leakage, gaps, bypasses and ventilation issues that were covered before.

ATTIC PREP + CORRECTIONS

We can address accessible air sealing, vapour-barrier details, insulated duct / pipe attachments, bathroom-fan exhaust details and safe furnace-stack clearances before new insulation goes back in.

RE-INSULATE THE ATTIC

After the reset, we rebuild the insulation system with cellulose, fibreglass or spray foam where the actual assembly calls for it.

WHY REMOVE IT INSTEAD OF COVERING IT?Removal gives us access to the attic floor. That means problems can be seen and corrected before we bury them under another layer of insulation.

SPRAY FOAM

03 / SPRAY FOAM

SEAL THE AIR.HOLD THECOMFORT.

offers spray foam insulation where the assembly calls for it. The right foam can add insulation value and help control air leakage at the same time, which can reduce drafts and make temperatures more consistent when the system is designed and installed properly.

THERMAL CONTROLAIR CONTROLOPEN CELLCLOSED CELL

INQUIRE ABOUT INSULATION SERVICES

SPRAY FOAM / INSTALLED ATTIC EXAMPLE

WHY SPRAY FOAM IS DIFFERENTWHAT THE NUMBERS MEAN

R-3.7–4.1OPEN-CELL / PER INCHThis is the approximate insulation value for each inch of material. Higher R-value means more resistance to heat flow. Open-cell usually gives you more expansion and cavity fill.

R-7.0–7.6CLOSED-CELL / PER INCHClosed-cell packs more insulation value into less depth. That can matter when space is limited and the assembly needs more performance from each inch.

R-VALUE + AIR SEALING.

In plain language: spray foam can help on two fronts at once. It adds insulation value and, in the right application, it can also reduce unwanted air leakage that carries drafts and heat loss through the assembly.

OPENEXPANDS MORE AND IS OFTEN USED WHERE BROAD CAVITY FILL AND AIR-SEALING PERFORMANCE ARE THE GOAL.

CLOSEDHIGHER R-VALUE PER INCH WHEN THE ASSEMBLY NEEDS MORE PERFORMANCE IN LESS DEPTH.

SEALSSPRAY-APPLIED COVERAGE CAN REACH JOINTS, CORNERS, WIRING AND OTHER IRREGULAR AREAS.

INSULATION SERVICES WE OFFER

ONE ATTIC.THE SERVICESIT ACTUALLY NEEDS.

offers the complete attic-insulation scope: top-ups, full removal and re-do, blown-in cellulose and fibreglass, spray foam, vapour barrier and air sealing, insulated pipe / duct attachment, bathroom fan exhaust work and safe furnace-stack insulation detailing.

ONE SERVICE OR A COMPLETE ATTIC RESET.We inspect the attic first, show you what needs attention and quote the exact services that fit the condition of the home.

WE OFFER:

Choose one service or combine the work into one complete attic scope. We inspect the attic first and recommend only what the home actually needs.

INSULATION TOP-UPSAdd cellulose or fibreglass when the existing insulation is still serviceable but the attic needs more depth, more even coverage or a higher overall R-value.

FULL REMOVAL + COMPLETE RE-DOVacuum out the old insulation, expose the attic floor, correct accessible problem areas and rebuild the insulation system from a clean starting point.

BLOWN-IN CELLULOSE + FIBREGLASSNew blown-in installation or top-up using the material that best fits the attic, existing insulation, available depth and target performance.

SPRAY FOAM INSULATIONOpen-cell or closed-cell spray foam for rooflines, walls or cavities where the assembly benefits from insulation plus air-control performance.

VAPOUR BARRIER + AIR SEALINGRepair or add appropriate vapour-control and air-sealing details around accessible attic penetrations before insulation covers the area again.

INSULATED PIPE / DUCT ATTACHMENTSeal and insulate attic-side duct or pipe connections so warm, moisture-laden air is not leaking into cold attic space.

BATHROOM FAN + EXHAUST WORKAdd or upgrade bathroom exhaust fans and connect them to properly sealed, insulated ducting that terminates outdoors.

FURNACE-STACK ATTIC DETAILINGRestore surrounding insulation while maintaining required clearances and non-combustible protection around combustion venting.

INQUIRE ABOUT INSULATION SERVICES

↓SCROLL DOWN — INSULATION REMOVAL

BLOW-IN / REAL-TIME FIBER FIELD